luxeon xr-3020 products are ultra-slim linear led modules optimized for narrow (20mm wide) lighting applications such as fuorescent replacements. the integrated solution comes in 1 or 2 foot versions with 24 or 48 leds mounted on a cem3 thermally conductive substrate. luxeon xr-3020 is designed for ease of system integration, simp lifed supply chain and faster time to market. luxeon xr-3020 linear led module on an ultra-slim and rigid substrate enabling high efcacy designs features and benefits primary applications 1100 or 2200 lumen packages at 100ma/led and 45c board temperature architectural 160lm/w for maximum light output and low power consumption indoor area lighting 1ft (24-up) or 2ft (48-up) length and zhaga defned screw hole locations C t-leds a range of cct options available in 80 or 90cri (3000C5000k) C trofers uses the industrys most compact, highest drive current 3v mid power ledsluxeon 3020 specialty lighting >50k hours led lifetime (l70) led performance matching to support the best light output uniformity, forward voltage, and color control 5 year limited warranty illumination ds159 luxeon xr-3020 product datasheet ?2016 lumileds holding b.v. all rights reserved. no. e335118
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. i table of contents general product information 2 product test conditions .............................................................................. 2 part number nomenclature .......................................................................... 2 lumen maintenance ................................................................................. 2 environmental compliance ........................................................................... 2 performance characteristics 3 product selection guide .............................................................................. 3 electrical and thermal characteristics .................................................................. 3 absolute maximum ratings ........................................................................... 4 characteristic curves 4 spectral power distribution characteristics ............................................................. 4 radiation pattern characteristics ...................................................................... 5 color bin defnition .................................................................................. 5 mechanical dimensions 6 packaging information 7 tray dimensions .................................................................................... 8 product packaging considerationschemical compatibility .............................................. 8
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. 2 general product information product test conditions luxeon xr-3020 products are specifed using a forward dc drive current of 200ma and a board temperature, t c , of 45c. the leds are electrically confgured in series strings of 12 with 2 or 4 parallel strings. the luxeon 3020 leds on luxeon xr-3020 are tested using a dc drive current at 120ma at a junction temperature, t j , of 25c. the minimum, typical and maximum performance numbers for luxeon xr-3020 in this datasheet are derived from individual led measurements. the confdence level on all minimum and maximum performance parameters in this datasheet is 99% to within individual led tolerance. part number nomenclature part numbers for luxeon xr-3020 follow the convention below: l 2 1 8 C a a b b 0 d d c e 0 0 0 0 where: a a C designates nominal cct (30=3000k, 35=3500k, 40=4000k, 50=5000k) b b C designates minimum cri (80=80cri, 90=90cri) d d C designates number of leds on board (24 or 48) e C designates board length (3=280mm, 0=560mm) therefore, the following part number is used for a luxeon xr-3020, 3000k, 80cri with 24 leds and length of 280mm: l 2 1 8 C 3 0 8 0 0 2 4 c 3 0 0 0 for luxeon xr-3020 cct/cri combinations not listed in this datasheet, contact your local lumileds sales representative or technical solutions manager. lumen maintenance please contact your local sales representative or lumileds technical solutions manager for more information about the long- term performance of this product. environmental compliance lumileds llc is committed to providing environmentally friendly products to the solid-state lighting market. luxeon xr-3020 is compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely the rohs directive 2011/65/eu and reach regulation (ec) 1907/2006. lumileds llc will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde).
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. 3 performance characteristics product selection guide table 1 product performance of luxeon xr-3020 at 100ma/led, t c =45c configuration nominal cct minimum cri 1 luminou flux 2 lm tpical luminou efficac lm/ tpical drie current ma part number minimum tpical 280mm, 24-up (2 parallel x 12 series) 3000k 80 1012 1050 151 200 l218-3080024c30000 3500k 80 1029 1070 153 200 l218-3580024c30000 4000k 80 1049 1088 156 200 l218-4080024c30000 5000k 80 1049 1088 156 200 l218-5080024c30000 4000k 90 850 890 127 200 l218-4090024c30000 560mm, 48-up (4 parallel x 12 series) 3000k 80 2024 2100 151 400 l218-3080048c00000 3500k 80 2058 2140 153 400 l218-3580048c00000 4000k 80 2098 2176 156 400 L218-4080048C00000 5000k 80 2098 2176 156 400 l218-5080048c00000 4000k 90 1700 1780 127 400 l218-4090048c00000 notes for table 1: 1. lumileds maintains a tolerance of 2 on cri measurements. 2. lumileds maintains a tolerance of 6.5% on luminous fux measurements. electrical and thermal characteristics table 2 electrical and thermal characteristics for luxeon xr-3020 at 100ma/led, t c =45c part number forard oltage 1 tpical termal reitance unction to eat in c/ tpical termal reitance unction to older pad c/ 2 minimum tpical maximum l218-xxxx024c30000 34 34.8 36 2.0 13 l218-xxxx048c00000 34 34.8 36 1.0 13 notes for table 2: 1. lumileds maintains a tolerance of 0.1v on forward voltage measurements. 2. typical thermal resistance junction to solder pad, is per led.
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. 4 absolute maximum ratings table 3 absolute maximum ratings for luxeon xr-3020 parameter maximum performance dc forward current [1,2] 480ma for l218-xxyy024c30000, 960ma for l218-xxyy048c00000 peak pulsed forward current [1,3] 600ma for l218-xxyy024c30000, 1200ma for l218-xxyy048c00000 led junction temperature [1] (dc & pulse) 125c esd sensitivity (ansi/esda/jedec js-001-2012) iec 61000-4-2 level 4 (8/15 kv contact/air discharge) operating temperature at t c point [4] -40 to 85c led module storage temperature -40 to 105c reverse voltage (v reverse ) luxeon leds are not designed to be driven in reverse bias notes for table 3: 1. proper current derating must be observed to maintain the junction temperature below the maximum. 2. residual periodic variations due to power conversion from alternating current (ac) to direct current (dc), also called ripple, with frequencies 100hz and amplitude 15% of the maximum allowable dc forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable dc forward current at the corresponding maximum junction temperature. 3. pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is 5ms per cycle and the duty cycle is 50%. 4. measured at t c point next to led. some manufacturers refer to t c as t s . see ab209 luxeon 3020 application brief for details. 5. per iec 62031, ethr=2215 lux. characteristic curves pectral power distribution characteristics figure 1: typical normalized power vs wavelength for luxeon 3020 at 120ma, t j =25c
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. 5 radiation pattern characteristics color bin defnition table 4. 3-step macadam ellipse color bin defnitions for luxeon m at 700ma, t j = 85c nominal cct color pace center point cx, cy maor axi, a minor axi, b ellipe rotation angle, 3000k single 3-step macadam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.22 3500k single 3-step macadam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00 4000k single 3-step macadam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72 5000k single 3-step macadam ellipse (0.3447, 0.3558) 0.00822 0.00354 59.62 notes for table 4: 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. figure 2: typical radiation pattern for luxeon 3020 at 120ma, t j =25c figure 3: 3-step macadam ellipse illustration for table 4
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. 6 mechanical dimensions notes for figure 4: 1. drawings are not to scale. 2. all dimensions are in millimeters. figure 4: mechanical dimensions for l218-xxxx024c30000
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. 7 notes for figure 5: 1. drawings are not to scale. 2. all dimensions are in millimeters. packaging information table 5 packaging information for luxeon xr-3020 part number tra dimenion mm uantit per tra number of tra per box l218-xxxx024c30000 635 x 220 20 5 l218-xxxx048c00000 635 x 220 10 5 figure 5: mechanical dimensions for l218-xxxx048c00000
ds159 luxeon xr-3020 product datasheet 20160316 ?2016 lumileds holding b.v. all rights reserved. 8 tray dimensions notes for figure 6: 1. drawings are not scale. 2. all dimensions are in millimeters. product packaging considerationschemical compatibility the luxeon emitter package contains a silicone overcoat to protect the led chip and extract the maximum amount of light. as with most silicones used in led optics, care must be taken to prevent any incompatible chemicals from directly or indirectly reacting with the silicone. refer to the luxeon 3020 application brief ab209 for guidelines on chemical compatibilities. figure 6: tray dimensions for l218-xxxx0cccx0000
?2016 lumileds holding b.v. all rights reserved. luxeon is a registered trademark of the lumileds holding b.v. in the united states and other countries. lumileds.com about lumileds lumileds is the global leader in light engine technology. the company develops, manufactures and distributes groundbreaking leds and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. with a rich history of industry frsts, lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. to learn more about our portfolio of light engines, visit lumileds.com . ds159 luxeon xr-3020 product datasheet 20160316 neither lumileds holding b.v. nor its afliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although lumileds holding b.v. and/or its afliates have attempted to provide the most accurate information and data, the materials and services information and data are provided as is, and neither lumileds holding b.v. nor its afliates warrants or guarantees the contents and correctness of the provided information and data. lumileds holding b.v. and its afliates reserve the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.
|
